Get NS0-184 Products Practice Material for NS0-184 Exam Question Preparation
Most Reliable Network Appliance NS0-184 Training Materials
NEW QUESTION # 20
You want to use the NetAppDocs tool to collect information on a newly configured ONTAP 9.8 cluster and to generate a Word document with the details of the cluster configuration.
Which two data sources would you use to collect the necessary data? (Choose two.)
- A. AutoSupport packages
- B. Active IQ Unified Manager
- C. ONTAP Cluster
- D. Active IQ Digital Advisor
Answer: B,C
NEW QUESTION # 21
You install a 4-node cluster with an AFF A400 HA pair and a FAS8300 HA pair. After setup, you are asked to review the audit logs on each controller from a Web browser.
In this scenario, which method provides access to the logs from a Web browser?
- A. ACP
- B. DNS
- C. SPI
- D. ADP
Answer: C
NEW QUESTION # 22
You have an AFF A400 cluster that is running ONTAP 9.7 software. You are asked to set up FlexCache for NFS volumes.
In this scenario, which statement is correct when implementing FlexCache?
- A. No license is required.
- B. A capacity license is required.
- C. A subscription license is required.
- D. A site license is required.
Answer: B
NEW QUESTION # 23
You want to ensure the highest path resilience and performance increase to the storage stack on your FAS8700 cluster.
In this scenario, which two types of stack cabling are available to use? (Choose two.)
- A. mixed-mode
- B. single path
- C. multipath HA
- D. quadpath HA
Answer: A,C
NEW QUESTION # 24
You have installed and configured a new AFF C190 cluster with ONTAP 9.7. Your customer wants you to install the latest version of ONTAP.
In this scenario, what are two methods to update ONTAP? (Choose two.)
- A. Use the cluster image package get and cluster image update commands.
- B. Use a USB drive with the new software image and let ONTAP automatically boot.
- C. Use ONTAP System Manager to upload and install the new software image.
- D. Use ONTAP System Manager to download and install the new software image.
Answer: A,D
NEW QUESTION # 25
You installed a new 2-node FAS500f ONTAP 9.8 switchless cluster that serves NAS volumes to both NFSv4.1 and SMB clients. The host operating systems have full flow control enabled on their data ports.
In this scenario, which two flow control settings would you verify? (Choose two.)
- A. Verify that the cluster network ports have full flow control enabled.
- B. Verify that the data network ports have full flow control disabled.
- C. Verify that the data network ports have full flow control enabled.
- D. Verify that the cluster network ports have full flow control disabled.
Answer: A,B
NEW QUESTION # 26
You want to disconnect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF A300 HA pair with two DS224C shelves with 3.8 TB SSDs without NSE in one stack.
In this scenario, how would you add the shelf?
- A. Add the shelf to the existing stack.
- B. Create a new stack on the HA pair to add the shelf.
- C. License NSE and add the shelf to this HA pair as a new stack.
- D. Connect the shelf to an HA pair with NSE drives.
Answer: A
NEW QUESTION # 27
Click the Exhibit button.
A customer has two Cisco 40GbE data switches. They want to connect the switches to an AFF A400 HA pair. The switches and the AFF A400 are approximately seven meters apart.
Referring to the exhibit, which two supported actions would allow you to accomplish this task? (Choose two.)
- A. Relocate the switches or the AFF A400 so that the distance is less than five meters.
- B. Change the requirement for optical cables.
- C. Install 10 meter NetApp supported copper cables.
- D. Change the requirement for Ethernet cables.
Answer: C,D
NEW QUESTION # 28
You have just finished installing and configuring an ONTAP cluster for a customer.
In this scenario, which product collects information and produces site documentation?
- A. Active IQ OneCollect
- B. SnapGathers
- C. NetAppDocs
- D. Inventory Collect Tool
Answer: C
NEW QUESTION # 29
Which three components are required when setting up a new ONTAP cluster? (Choose three.)
- A. intercluster IP
- B. Advanced Drive Partitioning
- C. cluster management IP
- D. password
- E. node management IP
Answer: A,C,E
NEW QUESTION # 30
An ONTAP cluster is installed at a secure site. The array has no access to the Internet but is managed 24/7 by onsite engineers. The customer requires that when hardware failures occur, the failures are reported to the NetApp Support team as quickly as possible.
In this scenario, which two tasks should be performed during the project hand-off procedure to satisfy the customer's requirement? (Choose two.)
- A. Educate the onsite engineers about invoking the AutoSupport tool from ONTAP System Manager.
- B. Ensure that the onsite engineers receive EMS alerts when hardware issues occur.
- C. Ensure that Active IQ Config Advisor is installed.
- D. Educate the onsite engineer about how to manually log support calls.
Answer: A,B
NEW QUESTION # 31
After moving a new AFF A400 cluster into production, the administrator notices error events in ONTAP System Manager regarding SAS HA issues.
In this scenario, which NetApp tool would have identified these errors after the installation process?
- A. ONTAP System Manager
- B. Active IQ Config Advisor
- C. Active IQ Unified Manager
- D. Cloud Manager
Answer: A
NEW QUESTION # 32
Which two statements are true about the LIFs that are used for a cluster peer relationship? (Choose two.)
- A. The LIFs must use the default intercluster service policy.
- B. At least one LIF per node is required on each cluster.
- C. The LIFs must be in dedicated broadcast domains an IPspaces.
- D. The MTU size must be set to 9000 bytes on all the LIFs used for the cluster peering.
Answer: A,C
NEW QUESTION # 33
After the installation of a new ONTAP 9.8 cluster, you have to verify if AutoSupport works.
In this scenario, which two commands would you use to accomplish this task? (Choose two.)
- A. system node autosupport check show
- B. system node autosupport destination show
- C. system node autosupport invoke
- D. system node autosupport history show
Answer: A,D
NEW QUESTION # 34
Your customer wants to know more about the network configuration within the cluster.
In this scenario, which statement is correct about a LIF?
- A. A LIF is an IP address or a WWPN that is associated with a port.
- B. A LIF is created within a broadcast domain and contains a pool of IP address.
- C. A LIF is a port that provides physical connections.
- D. A LIF separates network domains to access cluster data.
Answer: A
NEW QUESTION # 35
Click the Exhibit button.
You want to add an AFF A400 system to an existing 4-node cluster.
Referring to the exhibit, which number points to the ports that are used to cable the new nodes to the cluster interconnect switches.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 36
Click the Exhibit button.
You are installing a new FAS cluster. The management network must be on tagged VLAN 11 for remote administration by a service provider.
Referring to the exhibit, which two ports will allow service provider access to both cluster and node management LIFs? (Choose two.)
- A. e0a-11
- B. e0M-11
- C. e0b-11
- D. e0M
Answer: B,D
NEW QUESTION # 37
On which type of network interfaces are the cluster interconnect LIFs created?
- A. on a physical port
- B. on a UTA port shared with other LIFs
- C. on an FC or FCoE port
- D. on an interface group
Answer: D
NEW QUESTION # 38
When creating a new 3.8 TB SSD-based aggregate, what is the default RAID type used with ONTAP 9.8?
- A. RAID-TEC
- B. RAID DP
- C. RAID 0
- D. RAID 4
Answer: B
NEW QUESTION # 39
Click the Exhibit button.
Which set of components on a FAS9000 are highlighted in the exhibit?
- A. SAS-Module, Controller, USB-Port, FlashCache-Module
- B. Powersupply, Controller, USB-Port, NVRAM-Module
- C. FCVI-Module, Controller, Serial-Port, FlashCache-Module
- D. NVRAM-Module, Controller, Serial-Port, FlashCache-Module
Answer: C
NEW QUESTION # 40
A customer has a current AFF ASA A700 cluster and they want to expand the cluster by adding a second AFF ASA A700 HA pair.
In this scenario, which step would be required to accomplish this task?
- A. Install a BES-53248 cluster switch and convert the AFF ASA A700 from a switchless to switch cluster.
- B. The customer will need to create a separate cluster for the second AFF ASA A700 pair.
- C. Install a Brocade FC switch and create zoning between the original cluster and the new cluster.
- D. Enable ALUA between the two HA pairs to allow cluster backend traffic.
Answer: A
NEW QUESTION # 41
Which command would be used to measure the throughput and latency of traffic between nodes?
- A. qos statistics workload performance show
- B. network test-path
- C. statistics node show
- D. cluster ping-cluster
Answer: B
NEW QUESTION # 42
You are preparing to install a new 2-node AFF A250 system at a customer site with an existing cluster that uses NetApp CN1610 cluster interconnect switches.
In this scenario, what are two valid actions for this installation? (Choose two.)
- A. Create a new 2-node switchless cluster.
- B. Create a new 2-node switched cluster that uses the CN1610 cluster switches.
- C. Add the new nodes to the existing cluster and switches.
- D. Migrate the existing cluster to new switches and add the new nodes.
Answer: B,D
Explanation:
Reference:
https://kb.netapp.com/Advice_and_Troubleshooting/Flash_Storage/AFF_Series/Controller_Hardware_Upgrade3A_Adding_AFF_A250_nodes_to_existing_cluster_report_HA_interconnect_errors_and_c
annot_perform_takeover
NEW QUESTION # 43
You completed a 2-node AFF A700 installation according to the poster. You run the disk show -fields owner command and notice that all drives are assigned to node 1.
In this scenario, which tool would you use to access documentation and guidelines to solve the issue?
- A. NetAppDocs
- B. Active IQ One Collect
- C. Active IQ Unified Manager
- D. NET2
Answer: A
NEW QUESTION # 44
You have just racked a new 6-node switched cluster with ONTAP 9.7. You need to configure the cluster switches.
In this scenario, which two elements would be used to complete the configuration? (Choose two.)
- A. serial port
- B. SSH
- C. SFP+ port
- D. rlogin
Answer: A,B
NEW QUESTION # 45
......
To become a NetApp Certified Storage Installation Engineer, candidates need to pass the NS0-184 certification exam. NS0-184 exam consists of 60 multiple-choice questions that need to be completed in 1 hour and 30 minutes. NS0-184 exam is proctored and can be taken at any Pearson VUE testing center around the world.
The NS0-184 exam is intended for those who have experience working with NetApp storage systems and are looking to advance their skills and knowledge. NS0-184 exam is an industry-recognized certification that will enable individuals to showcase their expertise in the field of NetApp storage systems. It is a valuable certification for those who want to enhance their career prospects and job opportunities.
LATEST NS0-184 Exam Practice Material: https://pass4sure.updatedumps.com/NetworkAppliance/NS0-184-updated-exam-dumps.html