Free 365 Days Exam Updates CTS-D dumps with test Engine Practice
Updated Verified CTS-D dumps Q&As - 100% Pass Guaranteed
AVIXA CTS-D Exam Certification Details:
| Books / Training | Candidate Handbook |
| Sample Questions | AVIXA CTS-D Sample Questions |
| Passing Score | 350 / 500 |
| Schedule Exam | Pearson VUE |
| Non-Member Exam Price | $575(USD) |
| Number of Questions | 135 |
| Exam Code | CTS-D |
| MemberExam Price | $475(USD) |
| Exam Name | AVIXA Certified Technology Specialist - Design (CTS-D) |
NEW QUESTION # 90
What is the key difference between HDMI and DisplayPort?
- A. DisplayPort is wireless
- B. HDMI is used only for audio
- C. DisplayPort generally supports higher resolutions and refresh rates
- D. HDMI supports audio, DisplayPort does not
Answer: C
NEW QUESTION # 91
In which phase does a project manager need to work with allied trades to create proper workspaces?
Response:
- A. Training phase
- B. Maintenance phase
- C. Installation phase
- D. Design phase
Answer: D
NEW QUESTION # 92
Which abbreviation on a drawing tells you that you will not need to install a specific display screen?
Response:
- A. OD
- B. OC
- C. NTS
- D. OFOI
Answer: D
NEW QUESTION # 93
Which type of connector is commonly used for digital audio over coaxial cable?
- A. HDMI
- B. RCA
- C. USB
- D. XLR
Answer: B
NEW QUESTION # 94
When developing shop drawings of audio signal flow for a project what must be included in the diagram?
Response:
- A. Inputs, outputs, equipment rack locations, ceiling venting
- B. Construction materials, wall panels, acoustic tiles
- C. Microphones, mixers, switchers, routers, and processors
- D. Conduit runs, pull boxes, bends
Answer: C
NEW QUESTION # 95
Which of the following best describes "balanced audio"?
- A. Audio transmitted over wireless only
- B. Audio without volume control
- C. Audio transmitted using a single conductor
- D. Audio transmitted using two conductors and a shield to reduce noise
Answer: D
NEW QUESTION # 96
Using the diagram below, how would the AV designer confirm room dimensions?
Response:
- A. Look at lighting fixtures and calculate by surface area
- B. Measure from the 16" studs located in the wall blue print
- C. Use the scale to measure and convert to feet and meters
- D. Calculate using a measured door width
Answer: C
NEW QUESTION # 97
In a video system with multiple displays, problems with image quality in some, but not all, displays could indicate a problem with what?
Response:
- A. The video formats used
- B. The lengths of the video cables
- C. Extended Display Identification Data
- D. Incompatible High-Bandwidth Digital Content Protection keys
Answer: C
NEW QUESTION # 98
What is the advantage of converting an analog signal to digital?
Response:
- A. Digital signals carry audio and video feeds that analog will not.
- B. Digital signals have more signal headroom.
- C. Digital signals can address signal degradation, storage, and recording issues.
- D. Digital signals are more energy efficient to broadcast.
Answer: C
NEW QUESTION # 99
When considering viewers' visual field along a horizontal plane, people can recognize words, fine details, and color at what angle from the standard line of sight?
Response:
- A. 10 to 20 degrees
- B. 0 to 10 degrees
- C. 25 to 30 degrees
- D. 40 to 50 degrees
Answer: A
NEW QUESTION # 100
What is the purpose of mapping in human-centered interface design?
Response:
- A. Communicate the results of an action
- B. Lay out the design for clear understanding
- C. Communicate what the design can or cannot do
- D. Signal what actions are possible and how they should be done
Answer: B
NEW QUESTION # 101
Which of the following best describes the "waterfall" method in project management?
- A. A linear and sequential design process
- B. A risk management strategy
- C. An iterative design approach
- D. A collaborative brainstorming technique
Answer: A
NEW QUESTION # 102
What is the required bandwidth for 4:1:1 progressive digital video signal (1920 × 1080, 8 bits at 30 Hz)?
Response:
- A. 3.30 Gbps
- B. 1.49 Gbps
- C. 1.30 Gbps
- D. 746 Mbps
Answer: D
NEW QUESTION # 103
What is a common method to reduce electrical noise in AV systems?
- A. Ground loops
- B. Using unshielded cables
- C. Increasing cable length
- D. Proper grounding and shielding
Answer: D
NEW QUESTION # 104
If your venue is located in an earthquake prone region, what mounting precautions need to be taken to ensure the safety and security of persons and property?
Response:
- A. Mounted equipment should have a minimum safety factor of 3:1
- B. Lightweight construction panels and AV materials should be used
- C. Stabilizer arms, sway bars, and safety cables should be utilized
- D. Ceiling speakers should be tied to the ceiling grid
Answer: C
NEW QUESTION # 105
Which of the following is an example of an AV industry trade organization?
- A. FCC
- B. IEEE
- C. AVIXA
- D. OSHA
Answer: C
NEW QUESTION # 106
When creating a schematic diagram of audio signal flow for a project, what must be included in the diagram?
Response:
- A. Inputs, outputs, equipment rack locations, ceiling venting
- B. Construction materials, wall panels, acoustic tiles
- C. Microphones, mixers, switchers, routers, and processors
- D. Conduit runs, pull boxes, bends
Answer: C
NEW QUESTION # 107
To "train the trainer" is to __________.
Response:
- A. Host classes at the designer's office
- B. Train individuals at the client location who can train other users
- C. Train the client on aspects of the user interf
- D. Learn the AV system so you can train the client
Answer: B
NEW QUESTION # 108
Which wireless frequency band is commonly used for video transmission in AV systems?
- A. 900 MHz
- B. 60 MHz
- C. 2.4 GHz and 5 GHz
- D. 700 MHz
Answer: C
NEW QUESTION # 109
Which technology is commonly used for transmitting uncompressed digital video over long distances?
- A. HDMI
- B. Composite video
- C. VGA
- D. HDBaseT
Answer: D
NEW QUESTION # 110
What is the main function of an audio crossover in speaker systems?
- A. To convert digital audio to analog
- B. To amplify signals
- C. To connect microphones to mixers
- D. To split audio signals into frequency bands for different drivers
Answer: D
NEW QUESTION # 111
Which of the following best describes "system redundancy" in AV design?
- A. Increasing the number of cables
- B. Using backup components to increase system reliability
- C. Reducing the number of control points
- D. Adding more microphones than necessary
Answer: B
NEW QUESTION # 112
Calculating for loudspeaker coverage takes into account which of the following?
Response:
- A. Number of listeners, type of audio, speaker power
- B. Number of speakers, type of speakers, acoustic treatments
- C. Dispersal patterns, room dimensions, and number of speakers
- D. Ceiling height, listeners' ear height, and the speaker's angle of coverage
Answer: D
NEW QUESTION # 113
Which of the following is a benefit of using digital AV signals over analog?
- A. Susceptibility to interference
- B. Easier to amplify without distortion
- C. Higher signal degradation over distance
- D. Lower bandwidth requirements
Answer: B
NEW QUESTION # 114
An organization needs its own DNS server if it __________.
Response:
- A. Needs to statically associate certain names and IP addresses
- B. Needs to access the Internet
- C. Has more than one LAN
- D. Uses DNS internally to manage the names and addresses of devices on the private network
Answer: D
NEW QUESTION # 115
......
Provide Valid Dumps To Help You Prepare For Certified Technology Specialist - Design Exam: https://pass4sure.updatedumps.com/AVIXA/CTS-D-updated-exam-dumps.html